Polymer Clay Jewelry
polymer clay jewelry Is it possible to make a polymer clay bead to look similar to a dichroid bead? I finally figured out how to make a polymer clay bead to look like lampwork glass beads. I mak...
polymer clay jewelry
How to Add More Color to Your Metal Jewelry
This is reasonably interesting for somebody that hasn't heard of systems in adding more colours to their metals and has just been doing beaded jewellery making. Essentially, there are 3 common materials that can be bonded, fastened, or dripped onto metals to add more colours.
the 1st one is epoxy ; this is a low-tech material that you can use in your work. This is a cheap medium that can produce numerous results.
Resin and hardener are the 2 parts of the epoxy mix. It's merely a matter of time for it to cure and become a hard, durable, super glossy plastic substance that can be drilled, glued and sanded, when they're mixed. This is equal to 50 coats of varnish and dries to a mirror finish. Here's where the color comes in, use acrylic paint, gouache, jelly powder, makeup powder, or anything more that will think of.
Try playing with epoxy on some of your jewellery designs. You can try layering, drip it into etched or stamped depressions on sterling or copper sheets, and pour it into bezels ; you can try dipping things into it also. Significant reminder, you need to suspend any dipped work while waiting for it to cure. Epoxy is glue ; you don't want to glue it to anything. Epoxy cures fast, epoxy that are available in ironmongery shop customarily comes in five and 10 minute varieties, and others are fast too, so be certain of your working time, only mix up as much as you can use in the five or ten minutes. Don't mix it with anything you ever need to use again, or just mix them up on a piece of scrap paper with a stick. And, don't breathe or touch epoxy with your bare skin before it cures. Epoxy can be hazardous to your health, always consider good precautions in working with this sort of chemical.
Two-part epoxy is available from the hardware store in small 2-sided syringes, and you can also find it in large two bottle kits from craft and hobby suppliers.
The second material you can use to add colours to your metal is the polymer clay. Polymer clay comes in a variety of colours. This is formed from PVC ( polyvinyl chloride ) and goes under various brand names, like Fimo, Sculpey, and Friendly Clay.
In planning metal with polymer clay, to make polymer clay jewelry, cut metal sheet parts to make mosaics, and then fill the slices of sterling tubes with clay. You can try messing with liquid clays and colored powders that are available on the market.
However, polymer clay is created subtley different when it comes to quality from each manufacturer. So when using it, particularly when baking it is important to first read the instructions. You also need to condition the polymer clay before using it. Exercise conditioning by kneading the clay with your hands, or running it through a dedicated blender just make efforts to use dedicated tools.
the 3rd material you can use is the enamel. Enameling is not like the 2 materials we've debated earlier. Enameling uses powdered glass or glass granules, and a torch and kiln. These are all needed in making glass beads. We all know that glass beads can be very colorful, so you are able to add this to put more colours in your metalwork.
In this process, the glass is soft in thin layers onto a metal form, often on copper. The layers of liquified glass are typically vibrant and do not fade or chip under normal conditions, but bending metal can cause cracks in enamel.
Explore enameling with the utilization of powdered glass from enameling suppliers and a butane torch. Enameling suppliers also sell copper blanks and also try enameling sterling silver etchings and stamping.
In working with these materials for these methodologies, always use caution. Read and understand first all the instructions and precautions to avoid accidents.
.
About the Author
If you need help with your jewelry business then our beaded jewellery software is guaranteed to get your business organized. We also have free jewelry business tools and a free jewelry bookall designed to help you get the most out of your jewelry business.

















































truly I am a woman who doesn’t care about diamonds. Fiance knew that going into the engagement, thank God. Before he went ring shopping he talked to his mothers and fathers, and without asking, they pulled out a ring that’s been in their family for decades.
I’ve been looking to advise you, you’re right on. I came 2 this article from another engine and am really interested in this niche and learning about this. Do you mind if I link to this post from my mailing list?
Landscape…
[...]Polymer Clay Jewelry
| Clay Workz[...]…
Buy Costume Online Cheap…
[...]Polymer Clay Jewelry
| Clay Workz[...]…